Home /CO2 Metal Marking Machine
CO2 Metal Marking Machine
Feature:
- Adopting USA CO2 radio frequency metal laser generator, and high –speed scanner imported originally from USA., this series laser machine obtains high speed and high accuracy with laser focusing solution in the rear part. By using Window interface, the software of the machine is compatible with output formats, CorelDraw, AutoCAD, Photoshop, Illustrator etc. The power, which controlled by software is continually adjusted. Due to no consumable material existing, the fabrication cost is lower. It has high effectiveness with large marking area and fine marking laser beam. Besides, the engraving depth can be controlled and adjusted for purpose, suitable for all kinds of products of non-material.
- Optical design To ensure good laser mode, stable output, fine marking and laser beam, it adopts the new concept optical path design
- Mechanical Design Adopting the all-in-one structure with sealed optical path, the whole machine structure reliable with its modern and graceful figure.
Model no. | CL CO2-30w | CL CO2-55w | CL CO2-100w | CL CO2-150w |
---|---|---|---|---|
Output power | 30W | 55W | 100W | 150W |
Response Time | 0.8ms | |||
Laser wave length | 10.6nm | |||
Min Line Width | 0.2mm | |||
≤7000mm/s | ≤7000mm/s | ≤10000mm/s | ≤10000mm/s | |
Marking Speed | ||||
±0.0001mm | ||||
Repeat precision | ||||
Marking Depth | ≤2mm | ≤5mm | ≤5mm | ≤5mm |
Min line | 0.8mm | |||
Frequency of pulse | 20KHz | |||
Rsolution |